HWg STE2 R2 - Wi-Fi and Ethernet thermometer with DI inputs, up to 5 humidity temperature sensors can be connected

HWg STE2 r2

STE2 r2: LAN and Wi-Fi thermometer for remote monitoring

STE2 r2 can connect up to 5 sensors via 1-Wire and 1-Wire UNI and up to 2 detectors via digital contact inputs. For configuration, the STE2 r2 has a built-in web server. The device can be monitored remotely over the Internet from the free SensDesk portal, in combination with the SensDesk Mobile app. The device is supplied with the free application HWg-PDMS for creating graphs and exporting data to MS Excel. STE2 r2 is a device with SNMP support, designed for monitoring temperature and humidity from external sensors with the possibility of connecting to the Internet via Ethernet or Wi-Fi. If the permitted range of values ​​is exceeded, it immediately warns you with an alarm message sent by e-mail via the SensDesk online portal or SMS via the separate GSM gateway HWg-SMS-GW3. It includes an Alarms tab where you can define up to 3 sets of targets and assign them to individual sensors.

• Up to 5 sensors (1-Wire + 1-Wire UNI) and 2 DI (Digital Inputs) for detectors can be connected.
• 2x E-mail; 2x SMS + Ring notification, STE2 r2 includes the option to dial the target number (requires an external gateway).
• M2M communication protocols: SNMP, XML, HWg-Push, WWW interface (HTTP and also HTTPs), where safe ranges for sensors can be configured.
• Connected via LAN and WiFi. Configuration via the built-in web server.
• NMS connectivity (SNMP MIB); easy installation; DHCP support; TLS authentication support (Gmail).
• A sensor value outside the set range or a change in the state of the DI input sends a notification via e-mail, SMS or in the form of a ringtone. SMS gateway H located on the same LAN network can be used for ringing or SMS.
• Devices compatible with the SensDesk portal (IoT projects).
• 5 V or PoE power supply.
• Through the HWg-PDMS software, the recorded data can be exported to MS Excel.
• Compatible with a variety of third-party SW. Programmers will find product usage examples in the HWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA, etc.).

Typical applications

• Remote air conditioning control
• Remote monitoring of the refrigerator or freezer
• Medication storage + reports (SensDesk)
• Food storage
• Remote monitoring of the industrial environment
• Temperature and humidity monitoring
• CO2 monitoring
• Detection of water flooding at a point
• Monitoring of electric current
• Optimization of heating
• HVAC supervision

Packaging

• unit STE2 r2
• power adapter
• 1x temperature sensor on a 3m cable

Interface

• Wi-Fi (802.11b/g/n)
• 1x RJ-45 (10/100 Mbps)
• 2x RJ-11 (up to 5 external sensors)
• 2x DI input (2pin terminal block)

Features: LAN and Wi-Fi thermometer for remote monitoring

Operating temperature: -10 to +60 °C

Dimensions: 98 x 68 x 33 mm

Power supply: DC 5 V (jack 3.5 x 1.35 mm) or PoE