IMMAX connector CLICK 12mm with cable 10cm RGB+CCT 6pin

IMMAX CLICK 12 mm connector with 10 cm cable

Snap-on connector for RGB CCT LED strip width 12 mm, 6 pins. The length of the cable is 10 cm

Simple installation by just snapping the connector onto the LED strip. Designed for LED strip 07726L (NEO LITE Smart LED strip). With this connection connector, you can easily connect RGB + CCT (6× pin) LED strips with a width of 12 mm without the need for soldering. The connector can be used for IP20 & IP65\ protection tapes. You simply cut the LED strip in the place indicated by the scissor icon and snap the connector cover so that contact is made.

Usage

• The LED strip needs to be placed exactly on the pruning spikes
• that the pins on the tape are aligned with the pins. Subsequently, by pressing the plastic door, the contact pins will be cut into the tape and the connection will be secured. The connector door must be completely closed
• otherwise, the tape could be pulled from the connector and the connection would not work.

Warning: The connection connector is only compatible with RGB-CCT LED strip 07726L and may not fit other models of other manufacturers.

Connector: 2× 6pin

Cable length: 10 cm

Connector Dimensions: 21.5 x 16.2 x 7 mm

Compatibility: NEO LITE Smart LED strip (07726L)