Victron BlueSmart IP65 smart battery charger 12V 15A + DC connector
VICTRON | BPC121531064R | 8719076018025
On stock 6 pcs.
Price of goods is 140.8 €.
Weight of goods is 1.488 Kg.
Actual in cart 0 pcs.
Victron BlueSmart IP65 charger
Water and dust resistant charger with built-in Bluetooth technology, allowing you to display information from your charger to your smartphone, tablet or computer. Optimum for batteries with a capacity of 80-180 Ah.
- Built-in Bluetooth technology for setting, voltage and current display
- Resistance to dust, water and chemicals
- Intelligent seven-stage charging algorithm
- Recovering a completely discharged "dead" battery
- Automatic power function
- Resistant to low temperatures down to -30 °C
- Several additional features to increase battery life
- Low power mode for charging small batteries
- Special mode for charging Li-ion batteries
- 5 year warranty
Bluetooth
You can set up, view the status and configure the Blue Smart IP65 charger via your smartphone. You can even control the charger's functions using the VictronConnect app. The default value of voltage and current is displayed on the screen. You can download the VictronConnect app for free from Google Play or the App Store. This application is not yet available for Windows mobile phones.
Regeneration
A lead-acid battery that has already been undercharged or left discharged for days or weeks will deteriorate due to sulfation. If detected early, sulfation can sometimes be partially reversed by low-current charging before the battery reaches a higher voltage.
Recovery function for completely discharged batteries
Most reverse polarity protected chargers do not recognize batteries discharged to zero or near zero voltage and therefore will not start charging them. However, the Blue Power Charger will try to charge even a completely discharged battery with a low current and thus resume normal charging as soon as sufficient voltage appears on the battery terminals.
Ultra highly efficient "green" battery charger
At up to 94% efficiency, these chargers produce up to 4x less heat than the industry standard. When the battery is fully charged, the power consumption is reduced to 0.5W, which is 5x to 10x better than the common standard.
Long service life, safety and quiet operation
- Low temperature load of electronic components.
- Protection against ingress of dust, water and chemicals.
- Overheat protection: the output current will decrease as the temperature rises up to 60°C, but the charger will not fail.
- The chargers are completely silent: they do not contain an active cooler (fan) or other moving parts.
Storage mode: less corrosion of positive electrodes
Even the lower sustain charging voltage that follows the absorption phase can cause grid corrosion. It is therefore absolutely necessary to continue reducing the charging voltage if the battery remains connected to the charger for more than 48 hours.
Charging with temperature compensation
The optimal charging voltage for a lead-acid battery varies inversely with its temperature. The Blue Power IP65 Charger measures the ambient temperature during the test phase and compensates for it during charging. The temperature will be measured again when the charger is in low current mode during maintenance or storage. Therefore, there is no need for special settings for cold or hot environments.
Charging mode for Li-ion batteries
The Blue Power Charger uses a special charging algorithm with automatic resetting of undervoltage protection for Li-ion batteries (for Li-ion (LiFePO4) batteries). Normal charging voltage mode 14.4 V - suitable for gel and AGM batteries. High charging voltage mode 14.7 V - suitable for open top-up liquid batteries
Efficiency: 94
Input Voltage (AC): 180-265 V (45-65 Hz)
Charging current: 15 A
Absorption charging voltage: 14.4V
Sustain charge voltage: 13.8V
Storage Mode Voltage: 13.2V
Power consumption without load: 0.5 W
Protections
- output polarity reversal
- short circuit at the output
- overheating
Battery output: black and red cable 1.5 m long
230 V AC input to charger: 1.5 m cable with classic plug
Degree of protection: IP65
Type of plug: CEE 7/7 (Schuko)
Weight: 0.9 kg
Dimensions: 190 x 105 x 60 mm
Included in the package are supply cables with M8 eyelets and crocodile clips. Cables with a fuse and other accessories can be found in the related products.
Name | Value | |
---|---|---|
Input voltage [V] | 230 (AC) | |
Color | black | |
Weight, brutto [kg] | 0,9 | |
Dimension [mm] | 190 × 105 × 60 mm | |
Voltage frequency | 45-65 | |
Output voltage [V] | 12 (DC) | |
Maximum operating temperature [°C] | 60 | |
Minimum operating temperature [°C] | -40 | |
Schuko socket/plug quantity | 1 | |
Connector | clamps | |
Power voltage [V] | 13,2 |