Flame sensor OKY3054

2 Way Flame Sensor Module IR Receiver Sensor Infrared Receiver Module

• One can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance of about 2 test, the detection angle of 60 degrees, the spectrum is particularly sensitive to the flame.
• Sensitivity adjustable (shown in blue digital potentiometer adjustment).
• The comparator output signal clean, good waveform, driving ability, more than 15mA.
• Adjust the sensitivity of digital distribution.
• The working voltage of 3.3V-5V.
• The output format: digital switching outputs (0 and 1).
• Using a wide voltage LM393 comparator.
• The flame sensor flame most sensitive to ordinary light is also a reaction, generally used as a flame alarm purposes.
• A small plate output interface can be directly connected to the microcontroller IO port 10.With the flame sensor to maintain a certain distance, so as not to damage the sensor temperature.