GIGABYTE Z790 AORUS ELITE DDR4 Intel Z790 LGA1700 4x DDR4 4x M.2 HDMI USB-C

GIGABYTE Z790 AORUS ELITE DDR4

The board is equipped with a graphics output for use with processors with integrated graphics core. The motherboard does not include a graphics card and without using the corresponding processor, these outputs will be inoperative.

CPU

• Support for processors 14, 13 . and 12 . generation Intel Core/ Pentium Gold/ Celeron
• Socket LGA1700
• Intel Z790

Memory

• 4× DDR4 memory slot, support up to 128 GB
• Support DDR4 5333 (OC)/ 5133 (OC)/ 5000 (OC)/ 4933 (OC)/ 4800 (OC)/ 4700 (OC)/ 4600 (OC)/ 4500 (OC)/ 4400 (OC)/ 4300 (OC)/ 4266 (OC)/ 4133 (OC)/ 4000 (OC)/ 3866 (OC)/ 3800 (OC)/ 3733 (OC)/ 3666 (OC)/ -3600 (OC)/ 3466 (OC)/ 3400 (OC)/ 3333 (OC)/ 3300 (OC)/ 3200/ 3000/ 2933/ 2800/ 2666/ 2400/ 2133 MHz
• Dual-channel memory architecture
• Non-ECC support, unbuffered, 1Rx8 / 2Rx8 / 1Rx16
• ECC memory support (non-ECC mode), 1Rx8 / 2Rx8
• Intel Extreme Memory Profile (XMP) support

Slots

• 1× PCIe 5.0 x16 slot
• 1× PCIe 4.0 x16 slot (supports x4 mode)
• 1× PCIe 3.0 x16 slot (supports x4 mode)

Graphics

• 1× HDMI port, supporting max. resolution 4096 × 2160 at 60 Hz

Storage

• 1× M.2 slot, M Key, for type 22110/2280 drives (PCIe 4.0 x4/x2 mode)
• 2× M.2 slot, M Key, for type 22110/2280 drives (PCIe 4.0 x4/x2 mode)
• 1× M.2 slot, M Key, for type 22110/2280 drives (SATA and PCIe 4.0 x4 mode)
• 4× SATA 6Gb/s port
• RAID 0, RAID 1, RAID 5 and RAID 10 support for both SATA and NVMe SSDs

USB

• 1× USB-C 3.2 Gen2×2 port on the back panel
• 1× USB-C 3.2 Gen2 port accessible via internal USB connector
• 2× USB 3.2 Gen2 (USB 3.1) port on the back panel
• 5× USB 3.2 Gen1 (USB 3.0) port (3 ports on the back panel, 2 ports available via internal USB connector)
• 8× USB 2.0 port (4 ports on the back panel, 4 ports available via internal USB connectors)

Audio

• Realtek Audio Codec
• 2/4/5.1/7.1-channel High Definition Audio
• S/PDIF out support

LAN

• 1× Realtek 2.5Gigabit LAN controller

Internal connectors

• 1× 24pin ATX main power connector
• 2× 8pin ATX 12V power connector
• 1× CPU fan connector
• 1× CPU water cooling fan connector
• 3× system fan connector
• 1× system fan/water cooling pump connector
• 2× addressable LED connector strip
• 2× RGB LED strip connector
• 4× M.2 slot, M Key
• 4× SATA 6Gb/s connector
• 1× front panel connector
• 1× front panel audio connector
• 1× USB-C 3.2 Gen2 connector
• 1× USB 3.2 Gen1 (USB 3.0) connector (supports 2× USB 3.2 Gen1 port)
• 2× USB 2.0 connector (supports 4× USB 2.0 port)
• 2× Thunderbolt AIC connector
• 1× TPM connector (supports only GC-TPM2.0 SPI and GC-TPM2.0 SPI 2.0 modules)
• 1× Reset button
• 1× Q-Flash Plus button
• 1× Clear CMOS button
• 1× Reset jumper
• 1× Clear CMOS jumper

Back panel ports

• 1× USB-C 3.2 Gen2×2
• 2× USB 3.2 Gen2 (USB 3.1 Gen2)
• 3× USB 3.2 Gen1 (USB 3.0)
• 4× USB 2.0
• 1× HDMI
• 1× RJ-45
• 1× optical S/PDIF out
• 2× audio jack

Dimensions

• 30.5 × 24.4 cm
• ATX format