MHPower voltage converter MP-2100-48 inverter pure sine 48V 2100W

MHPower MP-2100-48

Low-frequency inverter of the MP series with pure sinusoidal output, which is suitable for powering power tools and sensitive appliances. Protection against overload, overvoltage, short circuit, reverse polarity and excessive discharge is a matter of course. In the battery power mode, the output will be turned off within 30 s at an overload of 110-130%. When the overload is above 130%, the output power will be interrupted immediately. The inverter has a toroidal transformer, i.e. lower static losses and greater energy saving.

Main features

• Robust all-metal design
• Supported batteries: GEL, AGM, classic flooded
• Unsupported batteries: Li-on, Li-Pol, LiFePO, etc.
• Toroidal transformer
• Clear LCD display
• Cooling: fan

Max. rated power: 210

Max. capacity: 3000 VA

Battery voltage: 48V

Output voltage

• 220 V + -3% for the inverter
• 50 Hz

Inverter consumption without load: 1.8 A max

Dimensions: 400 x 280 x 220 mm

Weight: 16.2 kg

Examples of use and operating time, battery life up to two years

Approximate operating time for 100 W consumption: When used with a 65 Ah battery, it will work for 6.5 hours. When used with a 120 Ah battery, it will work for 12 hours. When used with a 150 Ah battery, it will work for 15 hours

Approximate operating time for 200 W consumption: When used with a 65 Ah battery, it will work for 3.25 hours. When used with a 120 Ah battery, it will work for 6 hours. When used with a 150 Ah battery, it will work for 7.5 hours

Approximate operating time for 300 W consumption: When used with a 65 Ah battery, it will work for 2.15 hours. When used with a 120 Ah battery, it will work for 4 hours. When used with a 150 Ah battery, it will work for 5 hours