Planet IGS-10020PT Industrial Switch 8x 10 100 1000 PoE 802.3at (240W) + 2x 100 1000 SFP Management -40 +75°C

PLANET IGS-10020PT

Industrial managed switch 8x 10/100/1000Base-T, 2x SFP 100/1000Base-X, including PoE IEEE 802.3at injectors, power up to 240 W. IPv6 support, Web/SNMPv3 management, 255 VLAN 802.1Q networks, Spanning Tree, Rapid Spanning Tree, 802.3ad LACP line aggregation, Port shaper, QoS, DHCP snooping, LLDP. ONVIF, Alarm output in case of failure, protection IP30, aluminum case, working temperature -40~75°C. Overvoltage protection ESD+EFT LAN and power ports up to 6 kV. Mounting on a DIN rail or directly on the wall.

Intelligent switches for industrial Ethernet are intended for demanding operating conditions with a wide range of working temperatures, uncertain power supply and frequent shocks. At the same time, they provide excellent multiple interconnection capabilities to achieve system interconnection robustness with very low recovery time.

The IGS-10020PT is equipped for redundancy, in addition to the well-known Spanning Tree method (whose recovery time is in the order of seconds), especially the specialized "Redundant ring" function, which has a recovery time and finding a new path of up to 10 ms. As a PoE switch, it enables direct powering of up to 8 end devices according to the IEEE 802.3at standard, making it an ideal element for applications with reduced power supply options.

The Cybersecurity Solution feature minimizes security risks, protects switch management, and increases security at critical network points at no additional cost. It includes a number of features such as DHCP Snooping, IP Source Guard and many more. Special internal ONVIF software allows scanning the network to detect IP cameras, it is able to obtain information from the cameras about their operation and power supply. Thanks to the support of the Modbus TCP/IP protocol, it is possible to communicate with superior systems such as SCADA or HMI.

The switches of the IGS series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

Ports

• 8 x RJ-45 10/100/1000BASE-T
• 2 x SFP 1000BASE-SX/LX/BX
• 1 x RJ-45 console serial port

Memory: 8k MAC addresses

Throughput

• 20 Gbps bus
• operationally 14.8 Mpps

Transmission Support: JumboFrame 9K

Execution

• DIN rail
• on the wall

Power supply

• 48-56 V DC source
• consumption max. 207 W (source not included in the package)

Protection

• ESD up to 6 kV
• EFT up to 6 kV

Operating temperature

• -40°C - 75°C
• humidity up to 95%

Dimensions: 152 x 107 x 72 mm

Weight: 1032g

Administration functions

Administration

• console via RS232
• Telnet
• Web
• SNMP v1
• v2c
• SSH/SS

Access control

• IP and MAC based ACL protocol
• up to 123 records

Prioritization of QoS traffic

• 8 levels
• traffic prioritization according to 802.1p and according to ToS/DS in the IP packet
• possibility to set the limit of sent packets per port and according to QoS rules

Port shaper yes

VLAN support

• IEEE 802.1Q
• up to 255 VLAN groups, up to 4094 VLAN IDs
• Q-in-Q tunnelling
• Private VLAN Edge (PVE)
• MAC based VLAN
• Protocol based VLAN
• Voice-based VLAN
• Multicast VLAN

Spanning Tree Protocol

• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
• MSTP protocol, IEEE 802.1s Rapid Spanning Tree protocol

Port mirroring

• RX
• TX
• both

Line aggregation

• IEEE 802.3ad LACP/static trunk
• 8 ports in 5 groups

Multicast IGMP

• IGMP v1/v2/v3
• up to 255 groups

Authentication of connected devices

• RADIUS
• TACACS+
• SNMP v3

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices)

Cabling diagnostics

• yes
• determines the length of the cabling and the possible distance to the defect

POE function

Total power output

• 240 W
• IEEE 802.3a

Number of injectors: 8 x up to 26 W

Power type: End-span

Advanced features

• integrated scheduler for scheduled shutdown of powered terminal elements
• internal thermal protection
• automatic detection of powered devices
• detection of the activity of powered devices using ICMP, if there is no response, it can be restarted by disconnecting the power supply

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-6095

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to line-borne interference