Planet IGS-10080MFT industrial L3 switch 2x1Gb 6x1Gb SFP 2x2.5Gb SFP 12-48VDC -40~75°C IP30
PLANET Technology | IGS-10080MFT | 4711213689284
Price of goods is 410.31 €.
Weight of goods is 1.439 Kg.
Actual in cart 0 pcs.
PLANET IGS-10080MFT
Industrial manageable switch and converter 2x SFP 100/1000/2500 Base-X, 6x SFP 100/1000 Base-X, 2x RJ-45 10/100/1000 Base-T, IPv6 support. Web/SNMPv3 management, 255 VLAN 802.1Q networks, Spanning Tree, Rapid Spanning Tree, link aggregation 802.3ad LACP, Port shaper, QoS, DHCP snoopinp, LLDP, ERPS Ring (ITU-T G.8032), support MODBUS and 1588 v2 PTP (Precision Time Protocol). Possibility of redundant power supply in the range of 12-48 V DC or 24 V AC, protection IP30, aluminum case, working temperature -40~75°C. Cabling diagnostics. Overvoltage protection ESD+EFT LAN and power ports up to 6kV. Mounting on a DIN rail or directly on the wall.
Intelligent switches for industrial Ethernet are intended for demanding operating conditions with a wide range of working temperatures, uncertain power supply and frequent shocks. At the same time, they provide excellent multiple interconnection capabilities to achieve system interconnection robustness with very low recovery time.
The IGS-10080MFT is suitable for building FTTH networks or can be applied to connect end devices in technically and operationally demanding conditions via optical path. It is also equipped for redundancy, in addition to the well-known Spanning Tree method (whose recovery time is in the order of seconds), especially the specialized "Redundant ring" function, which has a recovery time and finding a new path of up to 300ms.
The switches of the IGS series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).
Ports
- 2x SFP 100/1000/2500 Base-X
- 6x SFP 100/1000 Base-X
- 2x RJ-45 10/100/1000 Base-
Memory: 8k MAC addresses
Throughput
- 26 Gbps bus
- operational 19.3 Mpps (64B)
Transfer Support: JumboFrame 9KB
IP protocol version
- IPv4
- IPv6
Execution
- DIN rail
- on the wall
Power supply
- AC 24 V or DC 12-48 V redundant
- connection possible from two different sources (not included in the package)
- total power consumption up to 13.92 W
Protection
- ESD up to 6kV
- EFT up to 6kV
- protection against polarity reversal
- power supply connection on the terminal board
- location on the bottom panel (does not interfere with wall mounting)
- switching alarm relay (24V/1A) in case of primary power failure
Operating temperature: -40 to 75°C
Dimensions: 152 x 107.3 x 76.8 mm
Weight: 1036 g
Administration
- Telnet
- Web
- SNMP SSH/SSL
- SNMP v1
- v2c
- v3
Access control
- IP and MAC based ACL protocol
- 256 rules
ACL filter and bonding
- IP ACL, traffic filtering according to IP address, protocol, port, TCP flags
- MAC ACL, traffic filtering according to MAC address, according to VLAN ID and combinations of priority flags
Prioritization of QoS traffic
- 8 levels
- traffic prioritization by port
- DSCP in IP packet
- 802.1p or 802.1Q tags
Port shaper settings in the range 500Kb - 1000Mbps
VLAN support
- IEEE 802.1Q
- up to 255 VLAN groups, up to 4095 VLAN IDs
- Q-in-Q tunneling
- Private VLAN
- MAC-based VLAN
- Protocol-based VLAN
- Voice VLAN
- Multicast VLAN Registration
Spanning Tree Protocol
- STP protocol, IEEE 802.1d Spanning Tree protocol
- RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
- MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol
Port mirroring
- RX
- TX
- RX+TX
- one to one
Line aggregation
- IEEE 802.3ad LACP
- up to 5 groups of 10 ports
Multicast IGMP
- IGMP v1/v2/v3
- up to 255 groups
- IGMP querier mode support
Authentication of connected devices
- IEEE 802.1x
- RADIUS
- IP/MAC binding
DHCP Snooping: yes (blocking foreign DHCP servers)
LLDP: yes (automatic detection of the type of connected devices)
Cabling diagnostics
- yes
- determines the length of the cabling and the possible distance to the defect
Industrial properties
- the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
- the device is resistant to vibrations (IEC-60068-2-6)
- the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
- electrical safety according to CE EN-60950
EMC Electronic compatibility (EMI)
- ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices
EMC Immunity Requirements (EMS)
- ČSN EN 55024 A1:2015 - Information technology equipment
- ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
- ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
- ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
- ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
- ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
- ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
- ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
- ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes
Name | Value | |
---|---|---|
Input voltage [V] | 12 - 48 (DC) | |
Color | blue - silver | |
Dimension [mm] | 152 × 107,3 × 76,8 mm | |
Minimum operating temperature [°C] | -40 | |
Maximum operating temperature [°C] | 75 | |
Total number of ports | 10 | |
PoE support | No | |
Indoor use | Yes | |
Conformity | FCC Part 15 Class A, CE | |
MODBUS support | No | |
Port speed | 1 Gb/s + 2,5 Gb/s | |
Fanless | Yes | |
SPF count | 8 | |
Device power supply | redundant | |
Bus capacity (GBps) [Gbps] | 26 | |
Design | DIN rail | |
OSI Layer | L2 |