Planet IGS-5225-4P2S PoE 4x 1000Base-T 2x SFP(DDM) L2 L3 SNMPv3-40 up to 75°C 2x DC IP30 802.3at 144W

PLANET IGS-5225-4P2S

Industrial manageable L2+ PoE switch 4x 1000Base-T, 4x SFP 100/1000Base-X (SFP-DDM diagnostics), 1x DI/DO, power supply up to 144W. Web/SNMPv3 management, 255 VLAN 802.1Q networks, Spanning Tree (ERPS), 802.3ad LACP line aggregation, Port shaper, QoS, DHCP Snooping. Redundant power supply 2x DC 48~56V (higher voltage for higher PoE performance), ESD overvoltage protection, IP40 protection, DIN installation, operating temperature -40~75°C. Gigabit managed switch working on 2. up to 4. layer of the OSI model. It has PoE injectors according to IEEE 802.3at, it is equipped with extended functions for use in large networks and on backbone connections. Static routing, powerful tools for QoS traffic management and security allow ISPs and network administrators to control and effectively manage network data, including a switch equipped as a central element.

Intelligent switches for industrial Ethernet are intended for demanding operating conditions with a wide range of working temperatures, uncertain power supply and frequent shocks. At the same time, they provide excellent multiple interconnection capabilities to achieve system interconnection robustness with very low recovery time. It is equipped for redundancy using the Spanning Tree protocol (whose recovery time is in the order of seconds and their fractions). L3 routing is supported for up to 32 rules and 8 VLAN interfaces.

The switches of the IGS series enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications). Their big advantage is the extended mean time between failures (MTBF)!

Possible monitoring of CloudViewer mobile applications.

Ports

• 4 x RJ-45 10/100/1000BASE-T
• 2 x SFP 1000BASE-SX/LX/BX
• 1 x RJ-45 (RS232) console serial port
• 1 x DI/D

Memory

• 8k MAC addresses
• buffer 4 Mb

Throughput

• 12 Gbps bus
• operational 8.928 Mpps (64B packets)

Transmission Support: JumboFrame 9K

IP protocol version

• IPv4
• IPv6

Execution

• DIN rail
• on the wall

Power supply

• 2x DC 48-56V
• redundant
• connection possible from two different sources
• total power consumption up to 151.8W (source not included in the package)

Protection

• ESD up to 6kV
• switching alarm relay in case of primary power failure

Operating temperature: -40°C - 75°C

Dimensions: 135 x 87.8 x 50 mm

Weight: 610 g

Administration functions

Administration

• console
• Telnet
• Web
• SNMP SSH/SSL
• SNMP v1
• v2c
• v

Access control

• IP and MAC based ACL protocol
• 123 rules

L3 static routing

• 32 rules
• 8 VLAN interfaces

ACL filter and bonding

• IP ACL, traffic filtering according to IP address, protocol, port, TCP flags
• MAC ACL, traffic filtering according to MAC address, according to VLAN ID and combinations of priority flags QoS traffic prioritization: 8 levels, traffic prioritization by port, DSCP/ToS in IP packet, 802.1p or 802.1Q tags

Port shaper 500Kb - 1000Mbps

VLAN support

• IEEE 802.1Q
• up to 255 VLAN groups, up to 4094 VLAN IDs
• Q-in-Q tunneling
• Private VLAN Edge (PVE)
• MAC-based VLAN
• Protocol-based VLAN
• Voice VLAN
• Multicast VLAN Registration Spanning Tree Protocol:
• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol Port mirroring: RX, TX, RX+TX, one-to-one

Line aggregation

• IEEE 802.3ad LACP
• 4 ports in 6 groups

Multicast IGMP

• IGMP v1/v2/v3
• up to 255 groups
• IGMP querier mode support

Authentication of connected devices

• IEEE 802.1x
• RADIUS

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices) Cabling diagnostics: yes POE function

Total power output

• 144 W
• IEEE 802.3at

Number of injectors: 4 x up to 36 W

Power type: End-span

Advanced features

• integrated scheduler for planned shutdown of powered terminal elements
• detection of the activity of powered devices using ICMP, if there is no response, it can be restarted by disconnecting the power supply internal thermal protection

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage