Planet ISW-500T 5x 10 100Base-TX ESD DIN IP30 -40~75°C

PLANET ISW-500T

5-port 100Mbit switch and converter for industrial applications. Possibility of redundant power supply DC 12-48V / AC 24V, power consumption <2W. ESD port protection. Protection IP30, aluminum housing, extended working temperature -40-75°C. Mounting on a DIN rail or directly on the wall.

Switches for industrial Ethernet are intended for demanding operating conditions with a large range of working temperatures, uncertain power supply and frequent shocks. The switches of the ISW series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

Physical properties

Ports: 5 x RJ-45 10/100BASE-T

Memory

• 1k MAC addresses
• buffer 448Kb

Throughput

• 1 Gbps bus
• operational 0.74 Mpps (64B)

Execution

• DIN rail
• on the wall

Power supply

• 24V AC source with 12-48V DC redundancy
• connection possible from two different sources (not included in the package)
• total power up to 2W

Protection

• ESD up to 6kV
• switching output for relay control (24V/1A) in case of power failure
• protection against polarity reversal
• power supply connection on the terminal board
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature

• -40°C - 75°C
• humidity up to 95%

Dimensions: 104 x 70 x 30 mm

Weight: 255 g

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
• ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
• ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes