Planet ISW-501T Industrial Switch 5x 10 100M -40~+75°C TB power supply 12-48VDC DIN metal chassis

PLANET ISW-501T

5-port 10/100Base-TX switch for industrial applications. Automatic detection of 10/100Mbps, full duplex, 2k MAC addresses, direct/cross cable detection. Possibility of redundant power supply in the range of 12-48V DC. DIN rail or wall mounting, IP30 protection, aluminum housing, extended operating temperature range -40 to 75°C.

Switches for industrial Ethernet are intended for demanding operating conditions with a large range of working temperatures, uncertain power supply and frequent shocks. The switches of the ISW series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

Physical properties

Ports: 5 x RJ-45 10/100BASE-T

Memory

• 1k MAC addresses
• buffer 448Kb

Throughput

• 1 Gbps bus
• operational 0.74 Mpps (64B)

Execution

• DIN rail
• on the wall

Power supply

• 12-48 V DC redundant
• connection possible from two different sources (not included in the package)
• AC 24 V support (from HW revision v2)
• total power consumption up to 1.6 W

Protection

• ESD up to 6KV DC
• EFT up to 6KV DC
• protection against polarity reversal
• power supply connection on the terminal board
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature: -40°C - 75°C

Dimensions: 135 x 87 x 32 mm

Weight: 400 g

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
• ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
• ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes