Planet IXT-900-2X1T industrial converter 1x 10G Base-T 2x SFP+ 10GBase-X IP40 -40~75°C dual power SNMP

PLANET IXT-900-2X1T

Industrial 10G converter for easy transition between metallic and optical lines (10G/5G/2.5G/1G/100M Base-T to 10G/2.5G/1G/100M Base-X with dual SFP+ port). Industrial design -40 to 75 °C, IP40 protection, ESD protection, wall or DIN rail installation, alarm output for power failure (relay; DC 24 V/ 1 A), dual power supply DC 9-48 V or AC 24 V.

The device is designed for industrial Ethernet in demanding operating conditions with a wide range of operating temperatures, uncertain power supply and frequent shocks. The converter can be easily installed on a standard DIN rail or wall and allows the expansion of Ethernet technology in industrial environments or outdoor installations (e.g. ISP and FTTH applications). It supports remote management via web interface, command line interface (CLI) and SNMP, which facilitates seamless monitoring and configuration from any location.

The device has one 10GBASE-T metallic port and two 10G SFP+ slots, which allows flexible connection using optical or metallic lines and ensures higher transmission capacity.

Possible monitoring by mobile applications CloudViewer Pro.

Ports

• 1× RJ-45 10G/5G/2.5G/1G/100BASE-T

• 2× SFP+ 10G/2.5G/1G/100BASE-X

Processing technology: Store-and-forward

Throughput

• 60 Gbps bus
• operational 29.76 Mpps (64B)

Record table

• 16K MAC addresses
• 12 Mb buffer

Transmission support: JumboFrame 9K

Design

• DIN rail
• wall-mounted

Power supply

• DC 9-48 V or AC 24 V
• power consumption max. 10.3 W

Protection

• ESD up to 4 kV DC contact
• up to 8 kV DC air

Operating temperature: -40 to 75 °C

Dimensions: 135 × 86.4 × 50 mm

Weight: 607 g

Administration functions

Management

• Telnet
• Web
• SNMP v1/v2c/v3
• SSH v2
• TLS v1.2

Traffic prioritization QoS

• Traffic classification
• Strict priority and WRR
• 8-level priority for switching (CoS/802.1p
• DSCP
• IP precedence)

VLAN support

• VLAN according to IEEE 802.1Q standard with tag
• IEEE 802.1ad Q-in-Q tunneling
• Up to 256 VLAN groups from 4096 IDs VLAN

LLDP: yes (automatic detection of the type of connected devices)

Port Configuration

• disable/enable port
• disable/enable flow control
• auto-negotiation 100Mb/s
• 1/2.5/5/10Gb/s
• full and half duplex mode selection

Bandwidth Control: Ingress/Egress: 16-10,000,000 Kbps

Ring

• ERPS support in accordance with ITU-T G.8032

• Recovery time < 450 ms

Industrial properties

• The device is drop resistant (IEC-60068-2-32) from a height of 75 cm on all impact parts
• The device is vibration resistant (IEC-60068-2-6)
• The device is overload resistant to short-term acceleration of 50g, long-term 4g (IEC-60068-2-27)