Planet XGS-6350-24X4C L3 switch 24x10G SFP+ 4x40 100G QSFP+ QSFP28 L3 RIP OSPF QoS 2x power-in

PLANET XGS-6350-24X4C

L3 switch for professional network operation management, 24x SFP+ 10G Base-SR/LR, 4x QSFP28/QSFP+ 100/40 Gigabit Ethernet, 2x RJ-45 (management and console), 1x USB 2.0 (backup ).

Hardware IP packet switching, high level of security, OSPF, RIP, DHCP client, DHCP server, VRRP support, VLAN 802.1Q, VLAN 802.1ad, STP/RSTP/MSTP, Multicast IGMP v3, mirroring 802.3ad LACP, QoS bandwidth. Web/SNMP v3 management, HTTPS, SSH/SSL, console, RADIUS and TACACS+ support, ACL filter, DHCP snooping, DoS and TCP protection, AC 100-240 V power supply (possibility of DC power supply with 2. optional source DC 36-72 V), rackmount 19"/1U.

Distribution backbone switch for application in the most demanding data infrastructures, which has advanced network algorithms and security functions. It is intended for deployment in data centers, corporate companies or metropolitan networks. Full throughput guarantees the effective availability of a network or network resources for operations conducted or controlled through it. The switch is an L3 router with support for RIP and OSFP protocols, it has an advanced ACL (Access Control List) filter that allows traffic to be controlled based on MAC or IP address detection, TCP/UDP protocol, IP priority from traffic through the switch, authentication of physical ports can be set using the IEEE 802.1x RADIUS mechanism. The device is managed by a WEB browser or by using the SNMPv3 protocol with SSH security. In general, the transmission bandwidth can be defined for each port supporting WRR control, DSCP and CoS values can be modified, traffic can be classified based on pass-through port, VLAN, DSCP, IP preference or ACL rule.

Ports

• 24x SFP+ 10G Base-SR/LR
• 4x QSFP28/QSFP+ 100/40G slot
• 1x RJ-45 (serial) console port
• 1x RJ-45 port for management
• 1x USB 2.

Memory

• 32k MAC addresses
• 4 MB buffer

Throughput

• bus 800 Gbps (non-blocking)
• operational 960 Mpps

Transmission Support: JumboFrame 9k

Design: rack 1U

Power supply

• 1x internal AC source
• redundant
• AC 100-240 V (50/60 Hz)
• power consumption up to 75 W

Protection: no

Operating temperature: 0 to +50 °C

Dimensions: 442.5 x 364 x 44 mm

Weight: 5990 g

Administration functions

Administration

• console
• Telnet
• Web
• SNMP v1/v2c/v3
• SSH
• SSL

Access Control: IP and MAC based ACL protocol

L3 function

• static routing
• RIP
• OSPF
• DHCP client/server/relay
• VRRP support
• routing table of 16K entries

ACL filter and bonding

• IP ACL, traffic filtering according to IP address, protocol, port, TCP flags
• MAC ACL, traffic filtering according to MAC address, according to VLAN ID and combinations of priority flags
• Time ACL, traffic filtering by time

Prioritization of QoS traffic

• 8 priority queues on all ports
• Ingress shaper and Egress limiter

VLAN support

• IEEE 802.1Q
• up to 4000 VLAN groups
• Q-in-Q (VLAN stacking)
• Private VLAN Edge (PVE)
• Protocol-based VLAN
• MAC-based VLAN
• IP Subnet-based VLAN

Spanning Tree Protocol

• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
• MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol

Port mirroring

• RX
• TX
• both

Line aggregation

• IEEE 802.3ad LACP
• 8 ports in 32 groups

IP Multicast

• IGMP v1/v2/v3
• IGMP querier mode support
• PIM-DM/SM

Authentication of connected devices: IEEE 802.1x (RADIUS) - IP+MAC binding

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices)

Cabling diagnostics: no