Solarix Cable CAT6 UTP PE Fca outdoor 500m coil SXKD-6-UTP-PE

Solarix SXKD-6-UTP-PE 500 m

A reliable outdoor unshielded U/UTP cable of the Cat6 category, which is designed for the operation of Ethernet protocols, including 2.5G Base-T and 5G Base-T. The construction of the cable is U/UTP with a plastic cross, which ensures maximum separation of pairs from each other along the entire length of the cable. Sheath type is UV stable PE with reaction to fire class Fca and degree of protection IP67. The conductors of the cable are made of high-quality copper wire with a copper purity of 99.97%. The cable easily meets the requirements of international standards ISO/IEC 11801, EN 50173 and ANSI/TIA 568.2-D. Like other Solarix cables, the SXKD-6-UTP-PE cable is marked in 1 m increments ranging from 0 to 500 m. The cable is supplied on a high-strength wooden spool, on which all necessary product information, including barcodes, production batch, description and most important technical parameters. When installing in the ground, we recommend always using an HDPE protector.

Technical parameters

Category: Cat6

Supported protocols: 2.5/5G Base-T and below

Shielding: no

Bandwidth: 250 MHz

Wire Type and Size: Copper Wire 0.55mm ± 0.005mm (AWG23)

Wire material: copper (99.97% purity)

Insulation: polyethylene (HDPE) 0.98 mm

Sheath: PE (LLDPE) - linear low density polyethylene

Class of reaction to fire: Fca

Cable diameter: 6.1 mm

Weight: 37.5 kg/km

NVP: 69%

Propagation delay: 535 ns/100m

Delay skew: ≤45 ns/100m

Storage temperature: -20 to +70 °C

Operating temperature: -20 to +70 °C

Installation temperature: 0 to +50 °C

Packaging

• 500 m
• wooden spool

Category: Cat6

Shielding: no

Wire type and size: copper wire 0.55 mm ± 0.005 mm

Insulation: polyethylene (HDPE) 0.98 mm

Sheath: PE