Solarix Cable CAT6A STP LSOH B2ca-s1d1a1 500m coil SXKD-6A-STP-LSOH-B2ca

Solarix SXKD-6A-STP-LSOH-B2ca 500 m

High-quality shielded STP cable of the Cat6A category, which is intended for the operation of high-speed Ethernet protocols, including 10G Base-T. Cable construction is U/FTP, sheath type LSOH with fire reaction class B2ca-s1,d1,a1. The conductors of the cable are made of high-quality copper wire with a copper purity of 99.97%. The cable easily meets the requirements of international standards ISO/IEC 11801, EN 50173 and ANSI/TIA 568.2-D. Like other Solarix cables, the SXKD-6A-STP-LSOH-B2ca cable is marked in 1m increments ranging from 0 to 500m. The cable is supplied on a high-strength wooden spool with all necessary product information, including line codes, production batch, description and most important technical parameters.

Technical parameters

Category: Cat6A

Supported protocols: 10G Base-T and below

Shielding

• yes
• foil around each pair

Bandwidth: 500 MHz

Wire type and size: copper wire 0.56 mm ± 0.005 mm

Conductor material: copper (99.97% purity)

Insulation: skin-foam-skin polyethylene (PE) 1.33 mm

Cloak: LSOH

Fire Reaction Class: B2ca-s1,d1,a1

Cable diameter: 7.6 m

Weight: 55.4 kg/km

NVP: 75% (Nominal Velocity of Propagation - the ratio of the speed of the signal in the cable to the speed of light in %)

Propagation delay: 480 ns/100 m (Signal delay on one pair)

Delay skew: ≤45 ns/100m (Signal delay difference between fastest and slowest pair)

Storage temperature: -20 to +60 °C

Operating temperature: -20 to +60 °C

Installation temperature: 0 to +50 °C

Packaging

• 500 m
• wooden spool

Package dimensions: 390 x 380 x 380 mm

Category: Cat6

Shielding: yes

Wire type and size: copper wire 0.56 mm ± 0.005 mm

Insulation: polyethylene (PE) 1.33 mm ± 0.05 mm

Cloak: LSOH