Solarix power supply panel ACAR S8 FA 3m 8 positions BK including holders up to 19" rails 1U ACAR-S8-FA

Solarix ACAR-S8-FA

The power panel is equipped with a new and highly reliable filter circuit that removes electromagnetic interference and perfectly protects all devices connected to it. This model is supplied with removable mounting brackets that allow it to be installed into a 19" frame of rack and wall cabinets. The height of the mounting brackets in the 19" frame is 1.5U and the length of the supply cable is 3m. The ACAR-S8-FA is also equipped with an illuminated switch, an automatic circuit breaker and allows up to four possible variants of the composition of the supply cable. Modern design, construction made of high-quality and non-flammable plastic (according to ČSN IEC 60884-1 and ČSN EN 61058-1) and fast varistors together with a low price guarantee this surge protection the best choice for all possible applications not only in the area of structured cabling.

A special version of the power supply panels for mounting in a 19" frame protects against overvoltage. The panels are fitted with a filter to protect all components installed in the cabinet. The unit is supplied with mounting plates or a mounting tray that allows the device to be installed as a module in a 19" plane. The panels are offered in variants with 5 or 8 drawers. The length of the power cable for both panels is 3 m. Holders, or a tub for mounting the distribution panel, up to 19" vertical rails are included in the delivery. Five or eight mains sockets turned by 45° with increased efficiency and a grounding pin. Quick fuses that ensure both phase and neutral supply against overloads and local short-circuits. Built-in filter suppresses harmonic oscillations of radio-electric disturbances. Varistor with a response time shorter than 25 ns enables absorption of overvoltage pulses up to 140 J. Illuminated switch enables disconnection of voltage from all sampling points of the ACAR device and at the same time optically indicates the presence of voltage in the sockets.

• Circuit breaker: 1 automatic circuit breaker with delayed response 10 A/ 250 V
• Switch: two-position backlit switch
• Leakage current: < 0.5 mA
• Delay time: < 25 ns
• Rated impulse voltage: 250 V, 50 Hz
• Protection level Up of the overvoltage system: ≤ 1.3 kV (L/N)
• Nominal leakage current IN: 2 kA (L/N) - 8/20 µs
• Maximum leakage current Imax: 6.5 kA (L/N) - 8/20 µs
• Attenuation of electromagnetic interference: ≤ 35 dB
• Overvoltage protection system: protective pins connected to a protective conductor (2P+Z system)

Number of sockets: 8 bipolar sockets 10 A/ 25

Nominal voltage: 230 V

Frequency: 50 Hz

Rated current (∑ IN): 10 A

Material (drawer panel): self-extinguishing plastic

Dimensions: 445 x 55 x 54 mm

Weight: 0.73 kg