Teltonika Router RUTX11

Teltonics RUTX11

Durable and powerful industrial LTE router designed for LTE/GNSS and WLAN technologies. It belongs to a group of compact, cost-effective and safe industrial IoT routers that guarantee high performance in an environment with a wide range of operating temperatures. It is equipped with two SIM slots and four GbE ports, Dual-Band AC Wi-Fi, Bluetooth LE, LED indicators of digital inputs/outputs and status LEDs that show the level of the received signal from the mobile network. Integrated GPS receiver ensures constant information about the position of the router. This router is ideal for advanced industrial and enterprise applications.

Advantages

• 4G (LTE) support - Cat 6 (up to 300 Mbps) and 3G (up to 42 Mbps)
• Dual SIM with Auto Failover, Backup WAN and other functions
• Wave-2 802.11ac Dual-Band Wi-Fi with speeds up to 867 Mbps + Bluetooth LE
• Remote access - Teltonika Remote Management System
• Quad-core ARM Cortex A7 CPU, 717 MHz
• Easy-to-use, secure RutOS operating system based on OpenWrt
• Support for VPN services
• Wide range of supply voltages for easier integration

Wireless part

• Wireless mode: IEEE 802.11ac (Wi-Fi 5), Dual Band, MU-MIMO, transmission up to 867 Mbps, AP and Station
• Encryption: WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
• ESSID (stealth mode) + wireless Hotspot
• Bluetooth LE (for short-range communication)

Mobile part

• Module: 4G (LTE) Cat 6 - up to 300 Mbps, 3G - up to 42 Mbps
• 2 x SIM slot (Mini SIM - 2FF)
• Status: Signal Strength (RSSI), SINR, RSRP, RSRQ, Sent/Received Bytes
• SMS notification

Ethernet part

• 1 x WAN port 10/100/1000 Mb/s, can be configured on LAN (auto MDI/MDIX)
• 3 x LAN port 10/100/1000 Mb/s (auto MDI/MDIX)

Network part

• Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)
• VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers (enable correct routing of VoIP packets).
• Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP
• Firewall: defines rules for communication (port routing, traffic rules, etc.)
• DHCP: static and dynamic IP allocation
• Network backup: backup with recovery in case of connection or power failure (VRRP)
• QoS: control by priority, source/destination, protocol or port
• DDNS: support >25 service providers, others can be configured manually
• Hotspot: internal/external Radius server, customizable landing page

Security

• Authentication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Predefined firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention: DDOS attack prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN: Separation of ports and VLAN tags
• WEB filter: blacklist for blocking unwanted websites, whitelist for specifying allowed websites
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN: support for multiple clients on the server, 12 encryption methods
• OpenVPN encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES- 128-CBC, AES-192-CBC, AES-256-CBC
• IPsec: IKEv1 and IKEv2 with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
• GRE: GRE Tunnel (General Encapsulation Protocol)
• PPTP, L2TP: client/server services can be started simultaneously
• Stunnel (planned): Encrypted network tunnel, mainly for programs that do not support SSL. It enables the connection of two networks through an encrypted TCP tunnel, or to secure the operation of unencrypted protocols or daemons such as IMAP, MySQL, POP, IRC and others. Adds TLS encryption functionality to existing clients/servers without any code changes.
• DMVPN: Creating scalable IPsec VPN networks

MODBUS

• Modbus TCP slave: ID range 0-255
• Modbus TCP master: support function 01, 02, 03, 04, 05, 06, 15, 16, support 8/16/32-bit data formats

Firmware customization

• Operating system: RutOS (OpenWrt based Linux OS)
• Supported programming languages: Busybox shell, Lua, C, C++
• Development tools: SDK package (with development environment)

GNSS

• GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
• Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS

Power supply

• 4pin DC, 9-50V
• passive PoE, incompatible with 802.3af/at
• consumption less than 16 W

Processor

• ARM Cortex A7
• 717 MHz
• 4 cores

Memory: 256 MB DDR3 + 256 MB SPI Flash

Ports

• 4 x RJ-45
• 1 x USB 2.0
• 1 x digital input
• 1 x digital output (on the power connector)
• 2 x SIM slot (Mini SIM - 2FF)
• 2 x SMA (LTE)
• 1 x SMA (GNNS)
• 2 x RP-SMA (Wi-Fi)
• 1 x RP-SMA (Bluetooth