Triton 19'" single-piece rack 9U 500mm fan knockout RAL7035

Triton RBA 19" 9U

One-piece wall-mounted cabinet with IP20 protection, load capacity when properly hung 80 kg. All-glass door with 4 mm tempered safety glass, robust welded construction. This type has six break-out blanks for mounting cooling units or fans. The cabinet includes two sliding vertical rails.

• High structural strength - The cabinet has a robust welded construction. High quality workmanship and the latest technology ensure a great appearance of the cabinet.
• Door - The cabinet doors are all-glass as standard, but can also be all-metal or perforated on request.
• Glass - All-glass doors are made of 4 mm tempered safety glass, which is resistant to common impacts. When broken, they form a number of small fragments like car glass. The doors are tested in a certified testing laboratory and meet the requirements of the ČSN EN 12150-1+A standard
• Flexible door opening - The proprietary hinge system allows the door to be opened at an angle of 165°. The door can be easily dismantled. By turning the entire cabinet, you can open the door to the opposite side.
• Door lock - Allows easy and quick access to the cabinet.
• Adjustable vertical rails - 19” vertical rails can be continuously adjusted at any depth of the cabinet. This facilitates the installation of equipment and the organization of connecting cables. The cabinet package includes one pair of vertical rails. There is a perforation in the rear part of the skeleton that replaces the second pair of vertical rails. Another option is to purchase vertical rails as an optional accessory.
• Knock-out blanking plugs - Cable entries are prepared in the upper, lower and rear parts of the rack, covered with knock-out blanking plugs. To prevent dust from entering, the cables in the opening can be sealed with a brush (included in the rack package).
• Ventilation - One-piece RBA racks version - A6 have six knock-out blanking plugs for mounting RAx-CH-X2x-X1 cooling units or RAX-CH-X07-X9 fans (up to three in the upper and three in the lower part of the rack). The RBA rack now allows the installation of equipment that previously could not be cooled in wall-mounted racks and had to be installed in rack-mounted racks.

Features

• 19” one-piece wall-mounted rack with IP20 protection.
• The rack is hung directly on the wall.
• The cabinet includes two sliding vertical rails.
• Cabinet construction - compact welded cabinet / all-glass door with 4 mm safety tempered glass, all-metal or perforated on request.
• The permissible load of each door is max. 10 kg.
• The minimum thickness of the surface treatment is 65 µm.
• The cabinets are intended for the installation of data and telecommunications equipment and its distribution systems.
• All separable parts of the cabinet are connected using connecting cables, which must be firmly attached and inserted into the connectors throughout the entire period of use of the cabinet.
• The main M8 grounding screw is located on the bottom of the cabinet.
• Cable entries covered with knock-out blanks are located in the upper and lower parts of the rear wall of the cabinet, others are on the upper and lower walls of the cabinet.
• The A6 version has fan mounting holes in the bottom and top of the rack covered with knock-out blanks.

Height: 9U (500 mm)

Depth: 500 mm

Width: 600 mm

Max. recommended load: 80 kg

Weight: 18.4 kg

Accessories

• 2× key - front door
• 4× screw 6×50
• 4× washer 6.6
• 4× dowel 10
• 8× floating nut M6
• 1× dust plug