Ubiquiti PowerBeam 5AC GEN2 ISO - AP client 5GHz antenna 25dBi MIMO2x2 RADOM airMAX AC 1x Gbit RJ45 PoE 24V

Ubiquiti PowerBeam 5 AC ISO Gen2

The PowerBeam 5AC-ISO-GEN2 with radome is a powerful complete outdoor unit including a 25 dBi MIMO 2x2 antenna for the 5 GHz band. The unit supports throughput up to 450 Mbps. Ideal as a client device and for PtP connections.

The PowerBeam antenna system consists of two antennas with linear horizontal and vertical polarization. Mounting the antenna is much easier thanks to the Inner Feed technology.

A big advantage is the high-quality directional antenna with radome, which filters noise better and the metal-plated radiator cover, which ensures better interference resistance. These innovations are particularly useful when used in disturbed areas.

Comparison of parabolic antenna radiation without radome and with radome.

For high transfer rates, the unit uses the 802.11ac standard and AirMAX (TDMA) technology to achieve low latencies.

The PowerBeam 5AC-ISO-Gen2 is from the second generation of airMAX AC devices that have a dedicated radio for wireless access to the unit and the ability to set it up in the UNMS mobile app. The UNMS application also helps with the orientation of the connection and will significantly speed up its installation.

Web administration is very simple and clear. You can set e.g.:

• AP, client or WDS mode
• traffic shaping
• QoS
• transparent bridge or routing between WAN and LAN, without NAT or with NAT
• signal strength, which should correspond to a specific signaling LED
• output power up to 24 dBm

The package also includes a 24 V/ 0.5 A Gbit power PoE injector.

Wi-Fi standard: airMAX ac

Antenna: 25 dBi

Ports: 1 x 10/100/1000 Ethernet port

Frequency band: 5150 - 5875 MHz

PoE support: yes

Dimensions: 459 x 459 x 261 mm