Victron EV charging station for electric cars NS 22kW 32A 3f 1f Type 2 without cable

Victron EV Charging Station NS 22 kW

High-performance EV Charging Station provides a maximum 22 kW AC in three-phase mode or 7.3 kW in single-phase mode.

802.11b/g/n Wi-Fi communication for configuration and monitoring

Internal Wi-Fi module can be configured in access point mode or station mode for initial setup and monitoring.

Light ring for quick device status indication

Fully programmable RGB light ring around the charging port for quick device status indication. From the web interface, it can be programmed to display different light effects according to the current status (disconnected, charging, fully charged, etc.). The aim is to help the user see the current status from a distance.

Three working modes

• 1 . Manual mode allows a configurable output current between 6-32 A. The charging power can be regulated in different ways: via the web interface, from the GX and VRM devices and via VictronConnect. Allows you to manually start or stop the charging process when the vehicle is connected to the charging station.
• 2 . Automatic mode to ensure maximum efficiency of the PV system. Detects when excess power is available and uses only this power to charge the vehicle.
• 3 . Scheduled mode to allow automatic charging at custom time intervals. The scheduler allows charging at different time intervals, for example at certain times of the night when grid power is cheaper. In addition to the start and end times, various parameters such as charging current and interval can be defined.

Automatic mode to ensure maximum efficiency of the PV system

Detects when excess power is available and uses only this power to charge the vehicle.

Integration with GX devices

The EV charging station can be configured and monitored from the GX screen device and the remote console.

VRM Integration

Several options are available on the VRM portal: real-time reports, custom reports for configurable time periods, and advanced features such as remote firmware updates.

This device is technically identical to the Victron Energy EV Charging station, without a built-in LCD display and with a new modern design, available in 3 colors (blue standard and white or black as optional accessories).

Rated power: 22 kW

Input voltage: AC 170-265 V

Rated charging current: 32 A per phase

Output current range: 6-32 A

Connector: IEC 62196 Type 2

Wi-Fi standards: 802.11b/g/n (2.4 GHz only)

Power terminals: 6-10 mm2 / AWG 10-8

Protection category: IP44

Weight: 3 kg

Dimensions: 372 × 292 × 122 mm