Victron Lynx Distributor

Victron Lynx Distributor

Modular fuse unit designed for four fuses. It monitors the individual fuses and the LED indicator on the front indicates their status.

The Lynx Distributor module includes a positive and negative busbar and allows connections for 4 individual circuits, loads or groups of DC devices. Each DC circuit is protected by its own fuse. An optional LED function is available for each fuse, which signals when the fuse is broken. If you want to use the LED indication of a broken fuse, you need to connect to a Lynx Shunt. The Lynx Shunt provides the supply voltage for the internal electronics of the Lynx Distributor.

A cable with RJ-11 or RJ-10 connectors\ is used to connect the Lynx Shunt to the Lynx Distributor. This cable comes with a boxed distributor. There are two ports on the Lynx Shunt and it is possible to use one. When all is well, only the central green LED lights up. When the fuse is broken or missing, the central LED and the broken fuse LED turn red. If you are not using all of the connection terminals, you will need to install fuses or jumpers on them to turn off the red LEDs.

Fuses are not included and Lynx Distributor does not support direct communication with GX devices using the VE.Can protocol

Voltage Range: DC 9-6

Supported system voltage

• 12
• 24 or 48 V

Reverse polarity protection: yes (RJ-10 cable connection not protected)

Rated current: 1000 A

Connection

• M8 contacts (bus and fuses)
• busbar 8 x 30 mm (tin-plated copper)

Power and data

• via RJ-10 cable (included in the package)
• Lynx Shunt VE.Can or Lynx Smart BMS (data and power only via BMS)

Cover

• IP22
• ABS plastic cover

Dimensions: 290 x 170 x 80 mm

Weight: 2.2 kg

Operating temperature: -40 to +60 °C