Victron Orion-Tr Smart DC-DC charger 12 12-30A (360W) isolated

Victron Orion-Tr Smart 12/12-30A insulated

The Orion-Tr Smart DC-DC charger is a professional DC-DC adaptive three-stage charger with a built-in Bluetooth function. It is intended for use in dual battery systems in vehicles or boats where a (smart) alternator and starter battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and controlled remotely using a remote on/off switch. The charger is also equipped with a motor detection mechanism.

The Orion Tr-Smart charger can be used in 12 V or 24 V systems and is suitable for both lead-acid batteries and lithium batteries. Models up to 400 W are available. To increase the output power, you can connect an unlimited number of units in parallel. It is also suitable for use at high ambient temperatures (up to 55 °C) and at full rated output power up to 40 °C.

With Bluetooth Smart connection option

• Any smartphone, tablet or other device can be used to monitor, change settings and update the charger when new software features are available.

Fully programmable

• Battery charging algorithm (configurable) or constant output.
• Smart alternator compatibility: engine running detection mechanism.

Adaptive three-stage charging algorithm: fast - absorption - floating

• For lead-acid batteries, it is important to keep the absorption time short during mild discharges to avoid overcharging the battery. After a deep discharge, the absorption time increases automatically to ensure the battery is fully charged.
• Absorption time for lithium batteries is constant, 2 hours by default.
• Or a constant output voltage can be chosen.

Remote on/off

A remote on/off switch or relay contact can be connected to the two-pole connector. Or the H (right) terminal of the two-pole connector can be switched to the positive terminal of the battery, or the L (left) terminal of the two-pole connector can be switched to the negative terminal of the battery (or, for example, the vehicle chassis).

All models are equipped with short-circuit protection and can be connected in parallel to increase the output current

• The number of units that can be connected in parallel is not limited.
• Protection against high temperature.
• Output current will decrease at high ambient temperature.

Protection IP43

When installed with screw terminals facing downwards.

Screw terminals

Installation does not require special tools. Input fuse (not replaceable).

Input voltage range: 10-17 V

Rated output voltage: 12.2V

Continuous output current (at 40 °C): 30 A

Continuous output power (at 40 °C): 360 W

Continuous output power (at 25 °C): 430 W

Efficiency: 87%

Operating temperature: -20 to +55 °C

IP degree of protection: IP43

DC connection: screw terminal block

Dimensions: 186 x 130 x 80 mm

Weight: 1.8 kg