XtendLan SFP+ 10GBase-LR SM 1270 1330nm WDM 20km LC connector

XtendLan MTB-LA20W2733

SFP+ module for 10Gbit Ethernet. LC simplex connector. One fiber at a time, WDM. Range of 20 km on single-mode fiber. Transmitting wavelength 1270 nm, receiving 1330 nm. Multirate Fiber channel. Support of most manufacturers (Cisco, Dell, Planet, ...)

Small-Form-Pluggable (SFP) conversion 10Gigabit module. Standard 1000Base-LR/LW, IEEE802.3ae, 10.3125Gbit/s. Simplex LC connector, for singlemode fibers. Expands/converts switch and converter ports with SFP+ slots.

We note that thanks to the selected wavelengths of 1270/1330nm, they can coexist on the same fiber with other active technologies that most often use wavelengths of 1310nm, 1490nm, 1550nm. There is also no need to take into account whether the cable is of type G.652B or G.652C,D, as both wavelengths are far enough from the "water peak" (1383nm).

For the connection between WDM modules, it is necessary to combine the TX/RX wavelengths of the opposite sides, pairs of modules are usually distinguished by a code representing the A or B side.

Module type: SFP+

Connector: LC simplex

Wavelength (transmission/reception): 1270 nm / 1330 nm

Thread Type: Singlemode

Connection range: up to 20 km

Transmission margin: 12 dB

Sensitivity: -14 dBm

Transmission speed: 9.95 - 11.1 Gb/s