Solarmi AC DC circuit breaker 40A for photovoltaics OEZ LTN-40D-1 class. D DC disconnector

Xtend Solarmi LTN-40D-1

1-pole circuit breaker (characteristic D) for reliable protection of cables and lines against overload and short circuits in circuits with higher short-circuit currents and breaking capacity of 10 kA.

• Designed for the protection of photovoltaic devices such as GridFree inverters

Characteristics of D

• for securing the wiring of electrical circuits with devices
• which cause high current surges. Short circuit release set to (10 ÷ 20) In (14 ÷ 28 for DC).).
• Breaking capacity: 10 kA according to ČSN EN 60 898
• Nominal voltage: 230/400 V
• Protection (with connected wires): IP20

Easy to connect: Double clamp with a solid partition in the middle and a captive screw. It allows the connection of the wire and the connecting strip from both sides of the device

Security

• The clamps are equipped with sliding plastic caps
• which increase protection against dangerous contact.

Connection: Interconnection of circuit breakers with LFE/LFN and OLI/OLE circuit breakers with a connecting strip above and below.

Mounting/dismounting on/from the “U” rail

• The latches enable very quick assembly and disassembly
• by hand without the need for tools. Ejecting/replacing a circuit breaker from a series of devices connected by a busbar above or below without interrupting adjacent circuits
• respectively without having to remove the bar.

Trip characteristic: D

Coverage: IP20

Short-circuit breaking capacity: 10 kA

AC voltage: 230/400 V

Rated current: 40 A

Dimensions: 89.8 x 76 x 17.6 mm