EPEVER TRACER10420AN solar MPPT controller 12 24 36 48V Tracer AN 100A input 200V

EPEVER TRACER10420AN

The powerful MPPT solar controller 10420AN brings a reliable solution for larger systems with panel voltage up to 200 V and a max. charging current of 100 A. Battery 12/24/48 V, PV max. 1250/2500/5000 Wp. MPPT solar controller EPEVER Tracer 10420AN - a new generation of powerful solar controllers brings high quality and maximum equipment for PV systems. The Tracer AN series is characterized by high charging performance, making it suitable for larger island and hybrid systems. A multifunctional display is integrated directly into the MPPT controller for easy monitoring of the system and possible setting of operating parameters incl. control LEDs.

Features

The regulator works as an inverter, that is, it can process a higher input voltage and a lower current to a lower voltage and a higher current with high efficiency. So we can use practically any solar panel. The controller is compatible with lead-acid and lithium-ion batteries.

Technology

Tracer AN series regulator based on multi-phase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common minus pole. MSRT can guarantee a very high conversion efficiency at any charging power, which clearly improves the energy efficiency of the solar system. The advanced MPPT control algorithm minimizes power loss and dead time, ensures tracking efficiency as well as high conversion efficiency at high or low power, so that in any situation, Tracer AN products can quickly track the maximum operating voltage of the PV array to extract maximum energy from the panel.

Monitoring and settings

Setting the controller parameters (mainly the type of battery used) is done using the built-in LCD or the external MT50 display - it is not part of the controller. There are three basic types of batteries: hermetically sealed, gel, flooded. The fourth option is a user-adjustable battery - here you can set any parameters. You can also set parameters and monitor on your PC, you will only need an EPsolar USB communication cable and software, which you can download for free on the USB cable card. It can also be monitored and set using a mobile phone or tablet. For this you will need the Bluetooth module BLE-01.

Load or automatic generator control relays facilitate the creation of a hybrid power system. Comprehensive electronic protections, including overcharge protection, overdischarge protection and PV reverse polarity protection, effectively ensure safer and more reliable operation of the solar system for a longer period of time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for the consumer to expand the device, supports the operation of up to 8 controllers in a row for system expansion, and meets various monitoring requirements, so it can be used in various devices, such as solar RV, home systems, off-road monitoring etc

Basic features

• CE certification (LVD EN/IEC62109, EMC EN61000-6-1/3)
• High-quality and low-failure components from ST and Infineon to ensure the longest possible product life
• Advanced MPPT technology and very high tracking rate up to 99.5%
• Maximum DC/DC transfer efficiency, up to 98.7%
• Advanced MPPT control algorithm minimizes MPP losses and dead time
• Accuracy of detection and tracking at the highest point of multiple MPP peak values
• Wide MPP operating voltage range
• Automatic control system to limit charging power and current exceeding the rated value
• Support for four types of batteries: Hermetically sealed, gel, flooded and user adjustable
• Battery temperature compensation function
• Real-time energy recording and statistics function
• Automatic power reduction function when the temperature is exceeded
• One hundred percent operation at full load in the temperature range of the working environment during charging and discharging
• Support up to 8 units in a row for system expansion
• The signal of the external load switch controlling the load relay to realize diversified working load modes
• First and second disconnection of load control, contains two relay contacts
• Design of automatic control function and generator relay
• Automatically controlled grid/generator relays facilitating the creation of a hybrid power system
• Remote temperature and voltage sensor option to collect accurate battery temperature and voltage data
• Isolated RS-485 port with DC 5 V/ 200 mA output for electrical devices with MODBUS protocol and without own power supply
• Monitor and set parameters using mobile applications or computer software

Rated system voltage: 12/24/36/48 V DC or aut

Battery input voltage range: 8V - 68V

Battery Type: Hermetically sealed (default) / Gel / Flooded / Custom

Rated charging current: 100 A

Max. PV open circuit voltage: 200 V (180 V at a temperature of approx. 25 °C)

MPPT efficiency: ≥ 99.5%

Conversion efficiency: max. 98.7%

Dimensions: 394 x 242 x 143 mm

**Weight