EPEVER XTRA2210N solar MPPT controller 12 24V XTRA 20A input 100V

EPEVER XTRA2210N

The user-friendly MPPT controller is used to control the flow of energy from the solar panel or power supply to the batteries and the appliance. It works with 12 V or 24 V systems and currents up to 20 A. The maximum input voltage is 100 V. The XTRA series of solar controllers is a new generation that follows on from the TracerA series. Improves the MPPT algorithm to be reflected in fast shading changes and adds direct support for LiFePO4 batteries. Support for lead/GEL/AGM batteries is a matter of course.

This solar controller is suitable for a wide range of island applications such as cottages, houses etc. It is also suitable for use in cars thanks to the possibility of earthing to the minus pole. A multifunctional display is integrated directly into the MPPT controller for easy monitoring of the system and possible setting of operating parameters incl. control LEDs. Everything other than user battery values can be set via the display. These values are set via the accessories, see below.

The maximum charging power for the battery of this model is 20A, which corresponds to a panel power of 260 Wp for a 12V battery, or 520 Wp for a 24V battery. If the panel gives a higher output, then the regulator will only limit it to its maximum. However, the output of the PV panels must not be higher than 1.5 times the nominal output of the regulator!

The open-circuit output voltage referred to as Voc must never exceed the value of 100V - exceeding this value will permanently damage the regulator (take into account that the solar panel voltage increases as the ambient temperature decreases and the Voc value given in the solar panel parameters is at 25°C). We do not recommend that the stated Voc value exceed 90V.

The controller parameters are set using the built-in LCD (the highest version XDS2) or the external MT50 display, see below.

The main advantage is the use of the state-of-the-art MPPT (Maximum Power Point Tracking) technology, which increases the efficiency of the entire system by 30% or more. MPPT technology ensures the maximum use of the energy supplied from the PV panel by selecting the consumption at the working point with the maximum supplied power. This point is continuously monitored and maintained. This compensates for all effects of temperature, different lighting intensities, etc.

Quick installation

• We will connect the battery to the solar regulator. We install a suitably sized DC fuse on the plus wire as close as possible to the battery pole (position 3)
• Connect the load (position 4)
• Connect the solar panel (position 2)

Basic features

• Multifunctional built-in LCD display for complete monitoring and parameter setting
• High degree of protection IP32
• Extruded aluminum back for efficient cooling
• The communication port uses a professional protection chip that can provide 5VDC power and has over-current and short-circuit protection.
• Advanced MPPT technology with at least 99.5% efficiency
• Advanced MPPT control algorithm to minimize lost speed and lost time
• High quality components with 98% conversion efficiency
• Precise recognition and tracking of the maximum power point
• Automatic limitation of charging power and current
• Wide MPP operating voltage range
• Compatible with lead-acid and lithium-ion batteries (setting via PC only)
• Battery temperature compensation function
• Real-time operational statistics feature
• Function to reduce the temperature in case of overheating
• With RS-485 communication bus interface and Modbus communication protocol
• Monitoring and setting via mobile phone or PC
• Extensive electronic protection

Overview of protections

• Current overload from solar panels
• Short circuit at the input of the panels
• Halving the input
• Biasing the battery
• Battery overvoltage
• Excessive battery discharge
• Battery overheating
• Low temperature of the lithium battery
• Load short circuit
• Load overload
• Regulator overheating

RJ45 interface (RS485 MODBUS open architecture) is used to connect PC, converter or external display REG-MT50 for setting/monitoring operation in real time

TIP: This MPPT solar controller can be monitored on your Windows PC

The product Communication converter to PC for Tracer and XTRA controllers (RS-485/USB) is used for this purpose. Learn how to easily monitor and save system usage logs.

The manufacturer EPsolar is practically the largest manufacturer of solar regulators today, and after more than eight years of our own experience with its products, we recommend this model to you as a highly reliable and high-quality product at a reasonable price.