Planet IGS-10020MT Industrial Switch 8x 10 100 1000 + 2x 100 1000 SFP Management -40 +75°C

PLANET IGS-10020MT

Industrial managed switch and converter 8x 10/100/1000Base-T, 2x SFP 100/1000Base-X, IPv6 support. Web/SNMPv3 management, 255 VLAN 802.1Q networks, Spanning Tree, Rapid Spanning Tree, 802.3ad LACP line aggregation, Port shaper, QoS, DHCP snooping, LLDP. Possibility of redundant power supply in the range of 12-48 V DC, protection IP30, aluminum case, working temperature -40 to +75 °C. Cabling diagnostics. ESD surge protection up to 6 kV. Mounting on a DIN rail or directly on the wall.

Intelligent switches for industrial Ethernet are intended for demanding operating conditions with a wide range of working temperatures, uncertain power supply and frequent shocks. At the same time, they provide excellent multiple interconnection capabilities to achieve system interconnection robustness with very low recovery time. The switches of the IGS series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

The IGS-10020MT is equipped for redundancy, in addition to the well-known Spanning Tree method (whose recovery time is in the order of seconds), especially the specialized "Redundant ring" function, which has a recovery time and finding a new path of up to 10 ms.

Ports

• 8 x RJ-45 10/100/1000Base-T
• 2 x SFP 1000BASE-SX/LX/B

Memory

• 8k MAC addresses
• buffer 512 KB

Throughput

• 20 Gbps bus
• operationally 14.8 Mpps

Transfer Support: JumboFrame 9KB

IP protocol version

• IPv4
• IPv6

Execution

• DIN rail
• on the wall

Power supply

• redundant
• 24 V AC
• or 12-48 V DC
• connection possible from two different sources (not included in the package)
• total power consumption up to 10 W

Protection

• ESD up to 6 kV
• power supply connection on the terminal board
• switching alarm relay (24V/1A) in case of primary power failure

Operating temperature: -40 to 75°C

Dimensions: 135 x 87.8 x 56 mm

Weight: 720 g

Administration

• Telnet
• Web
• SNMP SSH
• TLS
• SNMP v1
• v2c
• v3

Access control

• IP and MAC based ACL protocol
• 123 rules

L3 static routing

• 32 rules
• 8 VLAN interfaces

ACL filter and bonding

• IP ACL, traffic filtering according to IP address, protocol, port, TCP flags
• MAC ACL, traffic filtering according to MAC address, according to VLAN ID and combinations of priority flags

Prioritization of QoS traffic

• 8 levels
• traffic prioritization by port
• DSCP/TOS in IP packet
• 802.1p or 802.1Q tags

Port shaper settings in the range of 500 Kb - 80 Mbps

VLAN support

• IEEE 802.1Q
• up to 255 VLAN groups, up to 4095 VLAN IDs
• Q-in-Q tunneling
• Private VLAN Edge (PVE)
• MAC-based VLAN
• Protocol-based VLAN
• Voice VLAN
• Multicast VLAN Registration

Spanning Tree Protocol

• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
• MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol

Port mirroring

• RX
• TX
• RX+TX
• many-to-one

Line aggregation

• IEEE 802.3ad LACP
• up to 5 groups of 10 ports

Multicast IGMP

• IGMP v1/v2/v3
• up to 255 groups
• IGMP querier mode support

Authentication of connected devices

• IEEE 802.1x
• RADIUS
• TACACS+

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices)

Cabling diagnostics

• yes
• determines the length of the cabling and the possible distance to the defect

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
• ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
• ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes