Planet SGS-6310-48P6XR L3 PoE switch 48x1Gb 6x10Gb SFP+ HW IP stack VSF Cluster switch 802.3at 740W 2x power-in
PLANET Technology | SGS-6310-48P6XR | 4711605286688
On stock 2 pcs.
Price of goods is 979.63 €.
Weight of goods is 6.18 Kg.
Actual in cart 0 pcs.
PLANET SGS-6310-48P6XR
Stackable controlled L3 PoE switch, 48x RJ-45 10/100/1000 Base-T, 6x 10G SFP+ Base-SR/LR, 1x RJ-45 (RS-232) console port, PoE+ injectors 802.3af/at with total power up to 740 W (370 for AC power). IPv4/IPv6 static routing on 3. layer, dynamic routing using RIP (Routing Information Protocol) or OSPF (Open Shortest Path First), virtual and HW stacking, ERPS Ring - data transfer recovery time is less than 10 ms (ITU-T G.8032 ERPS Ethernet Ring Protection Switching). Q-in-Q, VLAN, Multiple Spanning Tree, MSTP, MLD, LACP, IGMP, QoS, LLDP, ACL - Access Control List, DHCP Snooping, IP Source Guard, Dynamic ARP, SNMP, 802.1x, RADIUS/TACACS+, SFP - DDM (Digital Diagnostic Monitor). Management - console/Telnet/web/SNMP v1/v2c, support SSH v1/v2, TLS v1.2 and SNMP v3, capacity 216 Gbps, routing 160.7 Mpps, Rackmount 19" (1U), power supplyAC 100-240 V (50/60 Hz) + DC 55 V (terminal block).
- Hardware Stacking - virtualization into one logical volume/system, 10G SFP+ interface, stack management using one IP address, support of up to 8 hardware units
- IP routing - supports RIP v1/v2 and OSPF v2 (IPv4) + RIPng and OSPFv3 (IPv6), VRRP v1/v3 protocols for redundant routing deployment, route redistribution, hardware VLAN routing
Ports
- 48x RJ-45 10/100/1000 Base-T
- 6x SFP+ 10G Base-SR/LR (backwards compatible with 1000 Base-SX/LX/BX)
- 1x RJ-45 (RS-232) console por
Memory
- 16k MAC addresses
- buffer 1.5 MB
Throughput
- 216 Gbps bus
- operational 160.7 Mpps (64b)
Transfer Support: JumboFrame 9KB
IP protocol version
- IPv4
- IPv6
Design: rackmount 1U
Power supply
- redundant
- source AC 100-240 V (50/60 Hz) + DC 55 V
- total power consumption up to 48 W (max. 830 W with PoE)
Protection: up to 6 kV (thunder-proof)
Operating temperature: 0 to +50 °C
Dimensions: 440 x 300 x 44 mm
Weight: 5200 g
Administration
- console via RJ-45
- Telnet
- Web
- SNMP v1/v2c + SSH v1/v2 support
- TLS v1.2 and SNMP v
Access Control: ACL protocol based on IP/MAC or time
L3 routing
- yes
- static and dynamic routing
- RIPng
- OSPFv3
- VRRPv3
ACL filter and bonding
- IP ACL, traffic filtering by IP address
- MAC ACL, traffic filtering according to MAC address
- Time ACL, traffic filtering by time
Prioritization of QoS traffic
- 8 priority queues on all ports
- traffic prioritization according to IEEE 802.1p and according to ToS/DS in the IP packet
- CAR
- HQoS
- MAC/IP/TCP/UDP
- IPv4/IPv6 DSCPs
- supports strict priorities and Weighted Round Robin (WRR) policies
- Tail-Drop
- WRED
- flow monitoring and traffic profiling
VLAN support
- VLAN with 802.1Q tags, up to 4K VLAN groups
- 802.1ad Q-in-Q tunneling (VLAN stacking)
- GVRP for VLAN management
- Private VLAN Edge (PVE)
- Protocol based VLAN
- MAC based VLAN
- VLAN with IP subnet (subnet)
Spanning Tree Protocol
- STP protocol, IEEE 802.1d Spanning Tree protocol
- RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
- MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol
- BPDU and root guard support
Port mirroring
- RX
- TX
- RX+TX
- many to one
- one to one
Line aggregation
- IEEE 802.3ad LACP/static trunk
- 64 groups with 8 ports per group
Multicast IGMP
- IGMP v1/v2/v3 snooping
- IGMP querier mode support
- MLD v1 support
- MVR support
- up to 1024 multicast groups (IPv4 + IPv6)
Connected device authentication: AAA TACACS+ and IPv4/IPv6 authentication over RADIUS (port/MAC based 802.1x access control + RADIUS/TACACS authentication)
DHCP Snooping: yes (blocking foreign DHCP servers)
LLDP: yes (automatic detection of the type of connected devices)
Cabling diagnostics
- yes
- SFP-DDM (Digital Diagnostic Monitor)
Total power output
- 740 W, PoE 802.3af, PoE+ 802.3
- 370 W (max.) AC
- 740 W (max.) DC
- 740 W (max.) AC + DC
Number of injectors: 48x to 30 W
Power type: End-span
Advanced features
- automatic detection of powered device (PD)
- circuit protection prevents power interference between ports
- managing total PoE power budget, port priority, power limit, PoE schedule, enable/disable PoE for individual port
- PD classification detection
- integrated scheduler for planned shutdown of powered terminal elements
- detection of the activity of powered devices using ICMP, if there is no response, it can be restarted by disconnecting the power supply
Name | Value | |
---|---|---|
Color | blue | |
Input voltage [V] | 55 (DC) | |
Dimension [mm] | 440 × 300 × 44 mm | |
Minimum operating temperature [°C] | 0 | |
Maximum operating temperature [°C] | 50 | |
SFP+ count | 6 | |
Standard | 802.3at | |
Indoor use | Yes | |
Device power supply | dual | |
OSI Layer | L3 dynamic | |
PoE output | 802.3af/at | |
Port speed | 1 Gb/s + 10 Gb/s | |
PoE properties | PD alive | |
Outdoor use | No | |
Stackability | IP stack + Hardware stack | |
Bus capacity (GBps) [Gbps] | 216 | |
Fanless | No | |
PoE output count | 48 | |
Gigabit LAN | Yes | |
Design | rack 19" |