Planet VC-231G Ethernet VDSL2 converter 1000Base-T master slave profile 30a G.993.5 Vectoring G.INP

PLANET VC-231G

Ethernet over telephone line (VDSL2 technology). 1x LAN RJ-45, 1x VDSL2 RJ-11. Transparent bridge. G.993.2 VDSL2, G.993.5 G.Vectoring + G.INP. Power supply DC 5 V/ 2 A (source is included in the package). Capacity 200/160 Mbps at 200 m. Range up to 1.4 km. Setting DIP switches, optional Master (CO) / Slave (CPE). Possible operation on VDSL O2 line.

LRE (Long Reach Ethernet) Ethernet converter to VDSL2 (Very-high-data-rate Digital Subscriber Line 2) Ethernet converter allows data to be transmitted over a symmetrical pair of wires at a speed of up to 200 Mbit/s at 200 m or 30 Mbit/s at a distance of up to 1, 4 km, transmission speeds depending on the condition and quality of the line used. The device is universal as a master (CO) / slave (CPE) unit, setting the mode with a switch. The unit supports VDSL2 operating modes according to transmission profiles "17a" and "30a", selection according to "band Plan997" and G.993.5 G.Vectoring & G.INP affecting symmetrical data transmission at higher speed even on parallel lines.

With the help of an external splitter, voice service can be maintained on the telephone line without further modification of the wiring. Thus, telephone cable lines originally intended for connection not only to subscribers but also between analog exchanges can be used with advantage. ISP (internet service provider) providers are thus enabled to offer multimedia services, VOD (video on demand), VoIP (voice over IP), Video phone, IPTV, etc. VDSL2 applications with advanced G.INP and G.Vectoring can also be operated within active elements via the SFP interface thanks to the XL-MGB-VDSL2-R2 module (see recommended accessories).

The modem can be successfully operated over VDSL lines of O2.

This product is not compatible with the PLANET VC-201A converter.

Ports

1x 10/1000Base-T, RJ-45 1x VDSL, RJ-11 Transfer support: JumboFrame 2K MAC addresses

Compliance with standards

• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3p

Transparent to: IEEE 802.1Q VLAN tag

Standard

• ITU-T: G.993.1 - VDSL
• G.997.1
• G.993.2 - VDSL2 (profiles 17a/30a)
• G.993.5 G. - Vectoring and G.INP
• G.998

DIP switching

• choice of CPE/CO
• choice of modulation
• choice of communication limit
• SNR selection

Power supply

• from an external adapter
• 5 V/2 A (source is included in the package)

Operating temperature

• 0 to 50 °C
• humidity <90%

Dimensions: 97 x 70 x 26 mm

Weight: 184 g

Can be installed in chassis

• MC-700
• MC-1500
• MC-1500R

Example of ranges and speeds (down/up Mb/s) on lines with AWG24 and better conductors

• 200m -> 225.34Mb/122.39Mb
• 400m -> 151.89Mb/78.78Mb
• 600m -> 90.42Mb/49.93Mb
• 800m -> 57.70Mb/29.87Mb
• 1000m -> 45.33Mb/9.21Mb
• 1400m -> 34.74Mb/5.75Mb

Settings for O2 VDSL connection

• modem in CPE mode; additional DIP switches Transmission, Band, SNR according to line quality
• apply VLAN ID:848 in the router to the WAN interface
• set PPPoE client over WAN, Login: O2/O2 also pay attention to the settings of your router, its firewall, access rights, UPnP, etc.