TINYCONTROL Wi-Fi controller with TinyESP relay

Tinycontrol tinyESP - Wi-Fi controller (LANKON-007)

TinyESP is a universal Wi-Fi controller using the opensource EasyESP system. Configuration takes place via the web interface.

• microUSB power input (5 V) or Li-Polymer battery (with charging function)
• 1x relay with terminals (NO, C, NC)
• 1x wire bus for temperature sensors (DS18B20)
• analog input for measuring voltage or batteries up to 5 V
• universal logic or pulse input
• I2C bus for various sensors on 2 connectors: 1.25 mm (Tina BME280 support) or 2.0 mm
• button to wake up the display
• reset settings to default or during firmware upload using the console
• UART serial port (voltage 3.3 V) - for uploading firmware (if there is no firmware) or for serial sensors such as CO2
• 2.0mm terminal for own use (2 GPIO shared with buzzer and IRLED)
• 2.54 mm connector for OLED 0.96" display (optional)
• buzzer to generate sound, can be used as an acoustic warning
• IRDA - IRLED transmission to send commands to various home appliances. The EasyESP system has rich functions for cooperation with various services such as Domoticz or OpenHAB. This system supports the MQTT protocol (mqtt.ats.pl can also be set) and allows control by other tinyESP devices. It is also possible to implement a simple automatic function triggered by a sensor reading (regulation at the controller level). Allows you to upgrade to other EasyESP firmware versions with new sensor support as test/development firmware. The upgrade is possible on the device's website under the Tools / Firmware Update tab. The correct file should be for the 4MB flash and the ESP8266 module.

Usage

• environmental measurement (temperature, humidity, PM, CO2, lighting)
• voltage measurement 0-5 V
• logical notification 0 - 1 (ground connection)
• cyclical sending of data to your own server (Domoticz, OpenHAB or others) or to the cloud like mqtt.ats.pl
• device control using relays: gates, heating or IR diode: TV, air conditioning.
• a buzzer or relay turned on by an http command from another network device such as a Lan Controller
• simple automatic function triggered by a sensor
• sending notifications by email
• buzzer notification
• display of current sensor data on the display
• simple distance measurement
• support for RFID readers
• and many others…

Power supply: 5 V (power input max. 1 W)

Relay: 3 A / 120 V AC

Wi-Fi: 802.11b/g/n (2.4GHz)

Dimensions: 72 x 40 x 30 m

Weight: 42 g