Victron VE.CAN Terminator RJ45 set 2 pcs

Victron VE.CAN RJ-45 terminator 2 pcs

This set is used to terminate the communication bus, which is usually implemented using a RJ-45 cable (a standard network cable, similar to those used in computer networks), to ensure correct and stable communication between devices in a Victron system. A correctly connected terminator ensures that all connected components will communicate correctly without errors or unwanted signal distortion.

Main purpose of the Victron RJ-45 terminator

Communication termination

• The terminator is used at the end of the communication chain of devices connected to a Victron system
• which uses the VE.Bus protocol (for Victron inverters) or VE.Direct (for communication with various devices
• e.g. BMS or solar controllers). Without proper termination, communication could suffer from unwanted reflections or signal distortion
• which would lead to instability or system failure.

Ensuring proper system operation

• In some Victron systems
• when the network is multiple devices
• a terminator is required for the proper operation of all connected devices.

Simplifying installation

• This kit can simplify configuration and ensure
• that communication between devices will work reliably.

Electrical connection

The electrical connection of an RJ-45 terminator is essentially very simple. The terminator has connectors that connect to the RJ-45 connector on the last device in your communication bus. In some cases, the terminator can be connected directly to the communication between two devices, or to the end of the communication cable to close the network.

Connector: RJ-45

Number of pieces in the package: 2